Skip to product information
1 of 1

HPC Werkz

4" COIL SPRING LIFT KIT WITH SST3000 SHOCKS - JEEP JK WRANGLER 4WD 2007-2018

Regular price $799.95 USD
Regular price Sale price $799.95 USD
Sale Sold out
Shipping calculated at checkout.
Add 8-Arm Terrain Flex Control Arm Kit - Jeep JK Wrangler 4WD 2007-2018
Add Exhaust Down Pipe Extension - Jeep JK Wrangler 4WD 2007-2018
Add Adjustable Track Bar - Jeep JK Wrangler 4WD 2007-2018
DETAILS

MOAB Tested! Trail Proven! ReadyLIFT is proud to offer a 4" Coil Spring Lift kit for the 2007-2018 Jeep Wrangler JK! This kit offers four (4) precision crafted coil springs to ensure unsurpassed on-road manners as well as increased off-road capability. Kit includes four (4) replacement front and rear sway bar end links, rear track bar relocation bracket, new bump stops and bump stop pads to ensure the correct articulation of your suspension. The ReadyLIFT 69-6401 kit INCLUDES four (4) SST3000 shocks.

The ReadyLIFT 4.0" Coil Spring Lift Kit lifts your Jeep JK Wrangler 4.0" in front and 3.0" in the rear for a lifted and level stance suitable for installation of 35" tall off-road tires. With the use of "flat fenders" you can install 37" tall tires. This kit allows you to confidently take your Jeep anywhere you want, on or off road, without sacrificing a quality ride or handling characteristics. The increased ground clearance provides many more off road opportunities than with a stock suspension along with the ability to install larger wheel and tires for the truly great lifted off road appearance!

NOTE: 2012-UP vehicles will require driveshaft and exhaust modifications. Recommend 47-6310 stainless steel exhaust spacer for 2012-up Jeeps for off road use.

NOTE: Installing a lift kit on any solid axle vehicle will alter the position of the axle. This can be corrected with the addition of an available adjustable track bar.

 

TIRE FITMENT

 

Requires aftermarket wheels.

35x12.50 on 4.5" bs wheel or 8" wheel with 4.5"/0mm offset or 9" wide with 0 or -12 offset.

 

37x12.50 with flat fenders

Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application.

Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience.

KIT COMPONENTS

(4) 4" lift coil springs (1) Rear track bar bracket (4) Sway bar end links (4) SST3000 Shocks (4) Bump stop extensions All necessary hardware

INSTALLATION
SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

DO IT YOURSELF!

Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.

Download Pdf Instructions
Estimated Installation Time: 6 Hours +/- 1 hour (excluding alignment and wheel/tire assembly)

HAVE A CERTIFIED MECHANIC DO IT FOR YOU!