Details & Product Specs
Our Standard HID kit is one of the best selling HID kits in the world. First introduced in 2006, our HID Kit is the original slim HID kit on the market. Since it's introduction we've made improvements to continue offering one of the highest quality kits available at an amazing price.
Standard Bulbs: UV Coated quartz glass from Philips, salts from APL USA and electrodes from Shyaer.
Upgrade to Ultra Bulbs for $5/kit: The Ultra HID Bulbs are quite simply the best. Modeled after the Osram CBI line of performance bulbs we've sourced quartz glass from Philips, sales from APL USA and electrodes from Plansee in Austria. On top of this we've redesigned the capsule to produce up to 20% more light than the standard Apexcone HID bulbs which are already and industry leading bulb. The quartz glass is optically clear with a UV coating to protect the headlights from UV radiation. The warm up time on the Ultra bulbs is about 20% quicker than Apexcone bulbs and will reach full brightness in 10-15 seconds.
Ballasts: Each ballast is assembled using micro processors to have a smaller footprint and insure the highest output. All ballasts power the bulbs with AC current to keep efficiency high and power consumption down. Universal 9006 input works with most OEM ballasts but some will require additional H1 to 9006 adaptors to power ballast. Each ballast is potted to protect against the elements and can withstand the vigorous abuse of off-road use. Internal circuits are protected against reversed polarity.
35W Ballast: 63mm wide, 15mm tall and 83mm long
55W Ballast: 68mm wide, 17mm tall and 106mm long
Wiring / Connectors: All non OEM HID bulbs come with Plug and Play adaptors to go between the factory wiring and the ballast (or HID Accessory) so there is no cutting or splicing needed. Industry standard AMP connectors are used to attach the bulb and ballast.
Warranty: The bulbs and ballasts are designed to last about 3000 hours, that's over 8 years if used every day for 1 hour. Regardless of usage time we offer a LIFETIME WARRANTY on all components in the kit.
All HID Kits have been and will always be sold with a Lifetime Warranty.
2 x Ballasts
2 x HID Bulbs
2 x Adaptors (when required)
Note: This is a non-Canbus HID kit. If your vehicle requires Canbus system, or you have DRL (daytime running light) built on your low beam or high beam, you would need to use a Canbus 35W HID kit instead, to prevent/address any compatibility issue.
View the Sylvania.com Bulb Lookup Guide Here (Note: We can't guarantee the accuracy of this guide, it is best to check your owners manual or physically remove your existing bulb)
1)H11A / H11B Bulb
Our regular H11 bulb is H11A. However, we do carry H11B bulb too.
2)H11 bulb, Straight base / 90 Degree Angle base
Our regular H11 bulb is of straight base. However, we do carry H11 bulb with a 90 degree angle base.
3) H7A /H7B Universal bulb
Our older Ultra H7 bulb inventory is H7A. However, our newer H7 bulb inventory has switched to H7A/H7B universal replacement!
4)- Lexus Fog Lights (2013 up)
- Nissan Fog Lights (2016 up)
- Subaru Fog Lights (2013 up)
- Toyota Fog Lights (2013 up)
- For those vehicles mentioned above, fog light bulbs marked with the following: "H16" "12V 19W" "64219L " This is a 19W halogen bulb that has a very similar base to the H11. Do not use HID's in these applications, the housings are made of a soft plastic and may melt with 35W HID kits. Please check the bulbs before ordering. Using an H11 LED bulb is recommended.