Skip to product information
1 of 3

HPC Werkz

VLR-3 RESISTOR WITH T ADAPTER

Regular price $15.00 USD
Regular price Sale price $15.00 USD
Sale Sold out
Shipping calculated at checkout.

The VLR Pro for V6 Tritons is by far the cleanest and safest way to add load to any vehicle lighting system.

Exclusive: VLR Pro resistors accomplish the same task as a common gold resistor but are easier to install, have a lower profile, and run 50% cooler (250°F MAX).

Construction: Using a wire wound resistor potted inside of a black anodized aluminum heat sink, these are the most weatherproof and thermally safe resistors on the market. VLR Pro resistors use high temp silicone wiring attached to a male waterproof circular connector.

Electrical: If you have our V6 Triton LED turn signal system, the VLR Pro conveniently plugs in-line into the provided T adapter.

Mounting: The supplied VLR High Temp mounting tape can be used to adhere the resistor body to a flat clean metal surface on the vehicle. As an extra precaution: VLR Pro resistors should be mounted out of harms way and should not touch any plastic or other wiring.

Learn more about adding load to your lighting system HERE.

TECHNICAL SPECS

VLR-3
Current Draw: 3.8A @ 12V | 4.5A @ 14.4V
Load = 2 standard filament bulbs (equivalent wattage: 50W)

The VLR Pro is by far the cleanest and safest way to add load to any vehicle lighting system that is using the V6 Triton. Our exclusive VLR Pro Load Resistors accomplish the same task as a common gold resistor but are easier to install and run 50% cooler (250°F MAX).